Once you’ve finished designing the quilt, you’ll need to start tying it. This is the simplest way to bind the layers of the quilt together. Once finished, it should have a comfy, puffier look. To do this, you’ll need to use a needle and yarn. If this one of your first times making a quilt, you’ll need to make sure that you’re getting the right equipment. To help you do this, you can use this best sewing machine for quilting compilation. Once you have everything you need, you can move on to tying the quilt. Let’s look at the steps that you’ll need to follow.
Step One: Find Your Recommended Tying Distance
Before you start tying the quilt, you need to know where you’ll need to put each tie. The best way to figure this out is by checking the batting. It should contain a tying distance on the package. This is the maximum distance that can separate each tie. If you aren’t using batting, you’ll need to put the ties close enough to stop the layers from shifting around. When done correctly, the quilt shouldn’t shift around too much when you wash it.
Once you know how far apart the knots should be, you’ll be able to start deciding where to put them. Make sure that you are covering the quilt in an even pattern. When thinking about where you are going to put the knots, think about your design. It will often look best if you can put the tie in the same place on each square.
Step Two: Mark The Quilt
Next, you’ll want to lay the quilt down on a flat surface. Smooth out any wrinkles. Then, using wash-out chalk, mark where you want each knot to go. This will ensure that you are covered the quilt in an even pattern. It will also give you a chance to see how the ties will impact your design.
Step Three: Thread The Needle
The first thing that you’ll need to do is thread the needle. When tying a quilt, you’ll often need to use a thicker needle. This will make it easier to pierce through the layers. It can also be a good idea to use a curved needle. This will be easier to pull through. It’s best if you use thicker yarn. Generally wood or cotton will work best, being strong enough to keep the layers in place.
Step Four: Insert The Needle
Next, you’ll need to insert the needle on the mark that you made earlier. Pull it through all three layers to make a running stitch. Then pull it out through the quilt in a backstitch. Try to come out as close to the insertion point as possible. Once out, you’ll need to cut the thread. You’ll need to give yourself at least three inches of tails. It’s easiest to start tying the quilt in the middle. From there, start to work your way out towards the edges. This video shows you how to thread the needle and complete the stitches.
Step Five: Tie A Surgeon’s Knot
Take the tails and use them to tie a surgeon’s knot. To do this, take the right thread and take it under the left thread. Then, take the right thread under a second time. Then, cinch the thread. Take the tails and repeat the process. Cinch them down. This is the completed surgeon’s knot. If you want a visual representation, check out this useful video:
When you’re tying the knot, try to avoid pulling too tightly on the thread. This can cause the fabric to start puckering. Once you’ve finished tying the threads, you’ll need to trim them off. The tails should only be half an inch.
Step Six: Repeat
Lastly, you just need to repeat the tying process through the rest of the quilt. When you’re finished tying, you can use your sewing machine to add the strip binding around the outside edges. This will complete the quilt.
Quilting can be a great hobby. You’ll be able to create unique designs that express your personality. Tying is one of the most exciting parts of the quilt-making process. When you start tying, you know it won’t be long until the quilt is complete. So, follow these steps to start tying your quilt today.